Javan Steel, Exclusive Distributor ofBeka-Mak Band Sawing Machines
BMSO 320 L
Beka-mak BMSO 320 L
Automatic Horizontal Band Sawing Machine
Fully automatic band saws for cutting solid stocks, tubes and steel profiles, cast-iron light and non-ferrous material. Only 90deg cut. Complete steel fabricated.Reduction gear in oil bath and 5 different speed adjusted by a stepped pulley, carbide pads and rollers in the blade guides.
The front jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor. The rear vice consist of a number of free running rollers.A limit switch assemebled on top the vice stops the machine when the block is exhausted.
Once the work piece clamped between the rollers no further clamping needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.
The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies.
Bimetal saw blade and 1,2 meter infeed roller table are supplied as standard.
Standard Features
- Saw Blade Brash
- Security Switch
- Mechanic Top Clamping
- Siti Gearbox
- Control Panel
- Inverter
- Metarial Limit Shaft
- Saw Blade 34
- Height Adjustment Switch
- Hydromechanic Blade Tension
- SAP Coolant Pump
- 1,2 Mt Roller Table
Optional Features
- ILC Microspray Device
- Hydraulic Blade Tension
- Sensitive Pressure
- Chip Conveyor
- 3 Mt Material Roller Table
- Hydraulic Vise
- Hydraulic Blade Tension
Technical Details
| Parameter | Unit | Value | |
|---|---|---|---|
| Height | mm | 1300 | |
| Width | mm | 850 | |
| Length | mm | 2100 | |
| Weight | kg | 770 | |
| Working Height | mm | 640 | |
| Band Dimensions | mm | 4160x34x1.1 | |
| Cutting Speeds | m/min | 20-100 | |
| Coolant Pump | kW | 0.12 | |
| Feed Motor | kW | 0.25 | |
| Hydraulic Motor | kW | 0.37 | |
| Main Drive Motor | kW | 2.2 | |
| Cutting Capacity (mm) | |||
| Cutting Angle |  |
 |
 |
| 0° | 300 | 500x320 | 330 |